(877) 241-0042 Toll Free
Data Logger with its Own Chart Display!
- Two sensors on 20' wires.
- Logs & displays 80,000 data points.
- Audio visual alarm.
- Dry contact relay
- Monitor -100°C, -80°C, -20°C, 0°C, 41°C 200°C, 1200°C
- Stores and shows 1.5 year temperature chart
- Uploads to computer or network.
- Internal alarm with optional phone dialer
- Accurate and inexpensive.
A Continuous Chart Recorder!
Logs temperature or temperature and humidity
This data loggers comes with two sensors to log temperature only or temperature/RH conditions. The sensors sample, store and display the temperature history on its own LCD display so there is never a need to download the logger to see the logged data. Of, course you can download the data to print out a record if needed. Each sensor comes with a twenty-foot cable which can be extended. The ThermaViewer can be used with either digital temperature sensors, thermistors, thermistor/RH, or thermocouple sensors.
Saves time and money
The ThermaViewer installs in minutes and requires on special training. It can be used with any type of thermocouple for a wide range of temperatures and accuracy. Each thermocouple or thermistor sensor can be field calibrated. If calibration adjustments are made they are stored on the sensor interface so that any sensor can be moved to another display unit without losing the calibration offset.
No charts or pens to change - ever.
One Year Chart Visible on the LCD
A continuous chart is always visible on the large LCD display. Over a year of temperature history is saved and displayed for each of the two sensors if temperature is sampled every ten minutes. Not only is the temperature history saved but it can be viewed on the display and even downloaded to a computer. You can zoom out on the display until you are literally looking at 1 year of data at one time.
Multiple displays
Scroll through the temperature history to spot trends, zoom in to see individual readings. The display includes a trace mode so that you can step through individual readings to see what the temperature was at any given time. Each unit comes with a PC interface cable and software so that the data can be downloaded to a laptop or PC for archiving or printing a paper chart.
Alarms with siren/strobe or dialer
The ThermaViewer has an onboard alarm and a relay which closes if user-set temperature time limits are exceeded to trigger an optional auto dialer or local alarm. An optional auto dialer can be used so that you and three other people will receive a phone call if the monitored temperature moves into your alarm area.
Store temperature history on your computer
The ThermaViewer normally holds over over 1.5 years of collected temperatures for each sensor (assuming that you are storing a reading every 10 minutes) which can be downloaded to a computer, and displayed as a chart or in Excel as tabular data.
